HOW DOES IT WORK?
S.A.F.E.Clip’s patented design allows the facemask to slightly move backwards and absorb the impact forces through a Sorbothane insert. Forces are absorbed and reduced in seconds, all before the facemask returns to its original position.
S.A.F.E.Clip is intelligently built and rigorously tested by third-party, accredited labs. Check out our testing and research proving our clips reduce g-force impact.

S.A.F.E.CLIP IS CONSTRUCTED OF HIGH QUALITY MATERIALS—UNLIKE STANDARD FACEMASK CLIPS.

SCREW

TOP PLATE

SHOCK ABSORBER

BODY

NUTPLATE
ASSEMBLING S.A.F.E.CLIP REQUIRES 5-MINUTES & SIMPLE DIRECTIONS
Step 1: Remove the existing facemask clips from your helmet. You can do this with a standard screwdriver.
Step 2: Open your S.A.F.E.Clip box.
Step 3: Unscrew the hardware so you have five separate pieces (as noted above).
Step 4: Using your hands, open the BODY; the rounded groove can slide over the facemask and snap into place.

Step 5: Add the TOP PLATE, as pictured. Place the SHOCK ABSORBER into the bottom of the BODY, next to the TOP PLATE (matching rounded edges together).

Step 6: Place the NUTPLATE into the mounting hole. Align the facemask with the mounting hole and add the top SCREW through the top plate.

Step 7: Secure the S.A.F.E.Clip with a Phillips head screwdriver until hand tight. Repeat these steps for each clip on the helmet. Done!
